Air tools and paint

Lightweight spray gun with easily adjusted flat variable fan pattern and fine control for paint/air mix. Locking cup with safety lever. Ideal for touch-up jobs and other localised paint spraying. Includes 6mm (1/4") bayonet quick connect. 250ml pot capacity.

Recirculating Sandblasting Kit 6pceAbrasive grit spray gun complete with 4 x different-sized nozzles. 850ml abrasive canister with easy detaching for quick refills. Soft rubber compound nozzles seal against flat and contoured surfaces. Ideal for detailed removal such as stone chips. Includes air sandblast gun, 4 x rubber nozzles, 1 x 500g tube of fine grit and collection bag for recycled grit. Includes UK and European 1/4" air quick connectors.

Spray Gun Suction Feed
Dual-action trigger, adjustable spray pattern and external mix nozzle. 750ml paint capacity. Nozzle diameter 1.5mm. Includes both UK and European 1/4" quick connectors.

Spray Gun High Pressure
High pressure spray gun with dual action trigger, adjustable spray pattern and external mix nozzle. 1Ltr pot capacity. Includes both UK and European 1/4" quick connectors.

Gravity Feed Spray Gun
Separate flow and pattern controls. Dual action trigger control. 1.5mm nozzle. 500cc nylon cup. Includes both UK and European 1/4" quick connectors.

High performance, well-balanced spray gun with separate flow and pattern controls. 100ml nylon cup and 1mm nozzle. High atomisation with low nozzle air pressure. Saves paint and protects the environment. Better than 75% transfer efficiency with less than 10% psi output pressure. Includes both UK and European 1/4" quick connectors.

Suction Feed Undercoat Gun
High-pressure suction-feed undercoating gun with 750ml pot capacity. Operating pressure 3 - 5bar, 8bar max. Air consumption 85 - 227L/min (3 - 8cfm). Includes both UK and European 1/4" quick connectors.

Aluminium construction with built-in speed regulator. Produces a quality, swirl-free finish prior to painting. Includes both UK and European quick connectors. 150mm diameter self-adhesive sanding pad. No load speed 10,000min-1. Air consumption 113L/min (4cfm).

Self Adhesive Sanding Discs 150mm 10pk
Aluminium oxide. Self-adhesive abrasive discs. For general purpose sanding

Self Adhesive Sanding Discs 150mm 10pk
Aluminium oxide. Self-adhesive abrasive discs. For general purpose sanding

Self Adhesive Sanding Discs 150mm 10pk
Aluminium oxide. Self-adhesive abrasive discs. For general purpose sanding

Fibre Discs 115 x 22.23mm 10pk
Heavy duty aluminium oxide resin-backed fibre discs. Round bore. For use with hand-held angle grinders supported by an appropriate backing pad. Use for grinding, finishing, stock removal and weld dressing. Suitable for use on steel, cast iron, alloys and wood.

Heavy die-cast construction with steel guard. Side handle for greater control. Supplied with grinding disc, locking and pin spanners. Uses 100mm diameter discs. Includes both UK & European 1/4" quick connectors. No load speed 25,000min-1. Air consumption 113L/min (4cfm)

Reversible air drill with 10mm keyless chuck. Side-mounted forward/reverse lever for one-handed operation and muffled handle exhaust. Includes both UK and European 1/4" quick connectors. No load speed 1800min-1. Air consumption 140L/min (5cfm).

Ideal for cutting thin sheet metal. Includes spanner and hex key. Features protective guard safety lock-off. Includes both UK & European 1/4" quick connectors. No load speed 20,000min-1. Compatible cutting disc product code 633551. Air consumption 170L/min (6cfm).

High power-to-weight ratio, forward and reverse gears, 4-position adjustable air/torque control and rocking dog clutch mechanism. Air consumption 4.0 cfm, torque max. 312Nm. Depth of body 170mm. Square shaft. Includes both UK and European 1/4" quick connectors. No load speed 7000min-1. Air consumption 113L/min (4cfm).

1/2" Square drive ratchet with twist-to-reverse mechanism. Trigger-operated power control. Torque max. 61nm. Overall length 260mm. With 3/8" socket adapter. Includes both UK and European 1/4" quick connectors. No load speed 150min-1. Air consumption 140L/min (5cfm).

For general body shop work. Also for removal of rust. Quick-change spring and built-in trigger. Includes 120mm chisel set: taper punch, spot weld breaker, panel cutting chisel and ripping chisel. Includes both UK and European 1/4" quick connectors. No load speed 4500min-1. Air consumption 4.0cfm.

Air die grinder will accept all 1/4" and 1/8" shank burrs and grindstones. Kit contains 10 mounted stones, 2 wrenches, 1/4" and 1/8" collets. Includes 1/4" bayonet quick connect. Air consumption 4.0cfm. Overall length of grinder 160mm.

Ideal for body shop repair, silencer and exhaust work. Safety throttle lever prevents accidental start-up. Balanced to reduce vibration. Adjustable blade guide. Includes both UK & European 1/4" quick connectors. No load speed 10,000min-1. Air consumption 113L/min (4cfm).

Air Line Filter Regulator
Provides clean, dry, regulated compressed air. Prevents costly damage to air tools caused by scale, rust and moisture. Simple installation means minimum downtime. 1/4" BSP female threads. Max. working pressure 10bar (145psi); adjustable pressure range 0.5-8.5bar. Reservoir capacity 150ml.

Air Filter Regulator & Lubricator
Provides clean, dry, regulated compressed air and lubrication. Prevents costly damage to air tools caused by scale, rust and moisture. The integrated oiler keeps your air tools lubricated. Simple installation means minimum downtime. G1/4" female threads. Max. working pressure 10bar (145psi); adjustable pressure range 0.5-8.5bar. Reservoir capacity 150ml.

Air Sandblasting Kit
For removing rust, limescale, chemicals and paint. Kit includes sandblasting gun, 1.5m rubber air hose and 3 spare nozzles. Working pressure 2.0-5.0Bar, 30-73 psi. Will draw abrasives from bucket or bag. Produces satin finish ready for paint or prep.

Air Line Rubber Hose
High quality reinforced, 8mm (5/16") bore. Working pressure 20Bar. 1/4" BSP female nut end fittings. Conforms to ISO 2398/2.

High quality reinforced, 8mm (5/16") bore. Working pressure 20Bar. 1/4" BSP female nut end fittings. Conforms to ISO 2398/2.

Corrosion-resistant chrome-plated hardened tempered steel. Straight pattern tyre lever. Hook and taper ends.

Quick bayonet to 8mm hose end. Overall length 55mm.

1/4" BSP male thread/quick coupler socket. Overall length 70mm.

1/4" BSPT (tapered) male thread. Zinc plated. Overall length 25mm.

1/4" BSP female thread air line coupling bayonet.

6mm (1/4") BSP female thread/quick coupler socket. Overall length 65mm.

Quick release air line male bayonet coupler. 1/4" BSP male thread. Length 55mm.

1/4" BSPT female thread. Zinc plated for corrosion resistance.

Die-cast zinc alloy air blow gun suitable for cleaning liquid swarf or dust during manufacture or assembly work. Includes both UK and European 1/4" quick connectors. Blow gun length 140mm.

Die-cast zinc alloy air blow gun suitable for cleaning liquid swarf or dust during manufacture or assembly work. Includes both UK and European 1/4" quick connectors. Long reach blow gun length 230mm.

Complete kit for spraying, inflating and cleaning. The kit comprises suction-feed spray gun with 750ml cup, 5m coiled air hose, tyre inflator, degreasing gun and blow gun. The air hose is fitted with 13mm (1/2") BSP female and male quick connectors. Operating pressure 55psi for spray and degreasing guns. Air consumption 3-6cfm. Compressor required 2-3hp.

Masking Tape
General purpose crepe paper masking tape with synthetic rubber adhesive designed for everyday room temperature masking and holding applications. High hold and adhesion rate to a wide variety of plastic, metal, glass and wooden surfaces. Peels cleanly leaving no adhesive residue. Can be written on and is easy to tear. 145mic peel adhesion =6.5N/25mm.

Solid round filaments tapering from base to tip. For use with emulsion, oil-based coatings, varnish, woodstain and laquer. Sizes 19, 25, 38, 50 and 75mm.

Solid round filaments tapering from base to tip. For use with emulsion, oil-based coatings, varnish, woodstain and lacquer. Sizes 25, 38 and 50mm.

Semi-flexible backing pad for use with hook and loop polishing sponges, bonnets and sanding discs. Compatible with power drills. Includes 6mm arbor. Max 3250rpm.

Aluminium oxide. For use with sander polishers. Hook and loop backing for quick fitting.